the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

97 sunfire passlock1


Post ReplyPost New Topic
< Prev Topic Next Topic >
97sunflower 
Member - Posts: 5
Member spacespace
Joined: November 10, 2008
Location: Manitoba, Canada
Posted: March 15, 2009 at 12:06 PM / IP Logged  
I installed a prostart along with a DEI 556lw in my 97 Sunfire. The problem I am having is getting the 556 to learn the resistance. I followed the book on how to program it cycle the key on off 2 times then start them car. The status led on the 556 doesn't blink like it's suppose to it just stays on. This is how I wired the 556 in brackets is where I wired the harness to on the car.
GREEN/ BLACK—(not used)
BLACK/ WHITE—(-) bulb check (black wire in black connector on left side of key cylinder)
BLACK—Passlock ground (Ground)
PINK—(+) ignition (Pink ignition wire)
BLUE—(-) status input (Ground when running on Remote Start)
VIOLET—(-) crank input (to ground through relay on start wire)
RED—(+) 12V (constant 12v)
WHITE—(not used)
YELLOW—key side resistance in (yellow passlock wire key side)
WHITE/ YELLOW—(not used)
BLACK / YELLOW—vehicle side resistance out (yellow passlock wire vehicle side)
If someone could help me out it would be greatly appreciated this is my first time doing a remote start but I'm not new to electrical.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: March 16, 2009 at 11:33 PM / IP Logged  

VIOLET—(-) crank input (to ground through relay on start wire)

start wire coming off of the harness is a postive output. you got a positive crank output going into the bypasses negative crank input.

97sunflower 
Member - Posts: 5
Member spacespace
Joined: November 10, 2008
Location: Manitoba, Canada
Posted: March 17, 2009 at 7:29 PM / IP Logged  
I have a relay on the start wire which sends the violet wire to ground while the engine is being started

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer