trunk release for honda accord 2000

Home / the12volt's Install Bay / Car Security and Convenience / trunk release for honda accord 2000 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lochuynh2700

Member - Posts: 31

Joined: November 06, 2010

Location: Texas, United States

Posted: November 07, 2010 at 4:37 PM / IP Logged

I'm trying to install the trunk release of a honda accord 2000 ex. I'm not sure where the "kick panel" is. Can someone tell me how to do the wiring? I bought the relay but I'm not too sure what to do.

Thanks!!!!!!!

lochuynh2700

Member - Posts: 31

Joined: November 06, 2010

Location: Texas, United States

Posted: November 07, 2010 at 4:38 PM / IP Logged

I'm trying to install the clifford matrix 1x to the car.

I forgot to mention.

kreg357

Platinum - Posts: 7,802

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 07, 2010 at 5:00 PM / IP Logged

The Trunk release is a WHITE/ Red wire in the Drivers Kick Panel. That is the plastic panel under the dash and just forward of the drivers door. ( Some cars have the Parking Brake assy there. )

The relay changes the Cliffords (-) Trunk Release output to a (+) signal that the car needs. Wire as follows.

Relay Pin 86 and 87 to +12v thru a 10 amp fuse.

Relay Pin 85 to the Clifford (-) Trtunk Release

Relay Pin 30 to the Accords WHITE/ Red wire.

Relay Pin 87a is not used - insulate the wire.

Soldering is fun!

lochuynh2700

Member - Posts: 31

Joined: November 06, 2010

Location: Texas, United States

Posted: November 07, 2010 at 5:39 PM / IP Logged

do I need to do anything with the trunk trigger? (orange wire)

kreg357

Platinum - Posts: 7,802

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 07, 2010 at 6:31 PM / IP Logged

Not to release / open the trunk lid. If the Clifford unit is an alarm system, then connect that as a trunk status input to monitor the trunk.

Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trunk release for honda accord 2000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.