the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2014 crv starter problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
matt911 
Member - Posts: 2
Member spacespace
Joined: November 11, 2014
Location: Alberta, Canada
Posted: November 11, 2014 at 7:02 AM / IP Logged  
I attempted to install a Compustar FT-7200S-CONT with Blade-AL bypass on a 2014 Honda CRV. The blade has been flashed with firmware DL-HA3.
I followed the blade guide and connected the wires indicated
http://cdncontent2.idatalink.com/corporate/Content/Manuals/DL-HA3/BLADE-AL(DL)-HA3-EN_20141031.pdf
Ignition
CanH
CanL
Key Data
Lock
Unlock
Ground
WHITE/ Black to Blue / YELLOW
On the Compustar 7200 I connected
2x power wires
Ignition
Starter
Accessory
Ground
I then went to do the module programming but the red light stays steady indicating "Waiting for more vehicle information". So I cannot not complete the programming.
When attempting to start the vehicle with the key the immobilizer light flashes and the vehicle will not start
I removed the compustar 7200 and left the wiring connected. Still the vehicle will not start. It tries to crank and then sometimes runs for half a second and shuts down.
Could someone please help me figure this out. Thanks.
matt911 
Member - Posts: 2
Member spacespace
Joined: November 11, 2014
Location: Alberta, Canada
Posted: November 11, 2014 at 10:32 PM / IP Logged  
Never mind I rechecked the connections and found one of the solder joints broke off from one of the wires on the blade harness.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer