the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

how to wire door lock actualtor from scra


Post ReplyPost New Topic
< Prev Topic Next Topic >
two12 
Copper - Posts: 84
Copper spacespace
Joined: November 24, 2009
Posted: January 19, 2015 at 8:02 PM / IP Logged  
hi,
I have a good working, spare actuator from an '88 GMC Truck (two wires) that I would like to install into an RV side door.
what type of relays set-up do I need to make this work? the factory GMC manual shows a module, I dont have one but I have a bunch of std. relays.
thanks
kreg357 
Platinum - Posts: 7,802
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 19, 2015 at 8:11 PM / IP Logged  

Here is a diagram : https://www.the12volt.com/doorlocks/page3.asp#arp  ( use the top diagram )

You will need two relays and an inline fuse holder with 15 Amp fuse.  The (-) Lock and Unlock inputs can be from a momentary switch or the output of an aftermarket RKE or similar system system.

Soldering is fun!
two12 
Copper - Posts: 84
Copper spacespace
Joined: November 24, 2009
Posted: January 19, 2015 at 8:30 PM / IP Logged  
thanks Kreg357 that should do it and Im glad it only need two relays.
now I need to figure out how to make the autopage control it, should be in the manual I have for it but I may have a question or two about that later.
thanks.
two12 
Copper - Posts: 84
Copper spacespace
Joined: November 24, 2009
Posted: January 20, 2015 at 7:28 PM / IP Logged  
need more help..
I wired it up to the alarm like this:
how to wire door lock actualtor from scra -- posted image.
using the bottom diagram (adding actuators)
it works with the alarm just fine but when I add the momentary switches to un/lock manually (momentary ground) it doesnt work, it doesnt do anything where as before I wired in the alarm it worked.
not sure whats going on?
thanks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer