the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper led problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
ramsfan 
Member - Posts: 24
Member spacespace
Joined: June 28, 2003
Posted: July 01, 2003 at 10:43 PM / IP Logged  

I installed a viper 500+ alarm in  a 2003 ford f150.I hooked up a relay  for domelight supervision which is working.When i arm the alarm i get one chirp followed by another chirp and the led will flash 3 times stop and instead of a constant flash .Any thoughts on why this is happening.  

mr12volt 
Member - Posts: 28
Member spacespace
Joined: June 17, 2003
Posted: July 02, 2003 at 7:24 PM / IP Logged  
The dome supervision delay is causing the alarm to think a door was left open.  That is what the second chirp is for.  It should still protect all zones of alarm after the dome light shuts off.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer