battery isolator

Home / the12volt's Install Bay / General Discussion / battery isolator (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

derrickg

Copper - Posts: 119

Joined: January 27, 2004

Location: Illinois, United States

Posted: March 15, 2004 at 2:30 AM / IP Logged

i have a phoenix gold isolator and i wanted to know how to hook it up it has four terminals on top 2 big ones 1 medium sized one and one small one

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: March 16, 2004 at 5:30 PM / IP Logged

Number (1) terminal is connected to the main (Engine / Starting) battery.

Number (2) terminal is connected to the second battery.

The (A) goes to the alternator, the (R) is the remote sensing wire which attaches to the regulator.

Please ensure you upgrade all wiring to and from the batterie(s) (power & ground) and to the alternator.

Lastly, if the battery is not a sealed AGM battery, ensure you secure and vent the battery to the outside to reduce combustable gases from building up.

Regards

EVIL Teken . . .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

battery isolator

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.