2 amp

Home / the12volt's Install Bay / Car Audio / 2 amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

vxliquid

Member - Posts: 2

Joined: April 26, 2003

Location: United States

Posted: April 26, 2003 at 5:10 PM / IP Logged

Can someone plz post an image or explain how wire the RCA's in a 2 amp config?

vxliquid

Member - Posts: 2

Joined: April 26, 2003

Location: United States

Posted: April 26, 2003 at 5:21 PM / IP Logged

Lets say that I only have one set of RCa's comming out of the radio

Big Purds

Silver - Posts: 574

Joined: November 25, 2002

Location: Canada

Posted: April 27, 2003 at 1:13 AM / IP Logged

you have to buy a set of splitters that have a single male end and two female ends...then run one set to each amp...

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: April 27, 2003 at 1:14 AM / IP Logged

Do you have an input and output on one of the amps for rca's? If so hook up your inputs from your headunit into that and hookup your output rca's from that amp into the input rca on the other amp. That is a daisy chain. If not then hook up a y male to two female connector and split the rca signal that way.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.