still confused on wiring 2 dvc subs.

Home / the12volt's Install Bay / Car Audio / still confused on wiring 2 dvc subs. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

j324

Member - Posts: 3

Joined: July 12, 2012

Location: Indiana, United States

Posted: July 12, 2012 at 5:15 PM / IP Logged

Okay i have a saz-3000d which is a mono amp and has 2 positive inputs and 2 negative inputs. I am trying to wire 2 dvc subs that are 1 ohm and i am trying to wire it to 1 ohm. could someone please describe on how to do this.

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: July 12, 2012 at 5:31 PM / IP Logged

Wire the coil of one voice coil in series with the other voice coil (positive to negative) on each sub. This will create (2) 2 ohm subs. Parallel the two subs for a 1 ohm load.

The amp has two + and two - for convenience - they are internally connected.

Kevin Pierson

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: July 12, 2012 at 5:39 PM / IP Logged

still confused on wiring 2 dvc subs. -- posted image.

Kevin Pierson

j324

Member - Posts: 3

Joined: July 12, 2012

Location: Indiana, United States

Posted: July 12, 2012 at 5:45 PM / IP Logged

Okay so on one sub you run a wire from the negative of one voice coil to the positive of the other voice coil then you run the 2 remaining positive and negative to the amp? And repeat for the other sub?

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: July 12, 2012 at 5:50 PM / IP Logged

You got it.

Kevin Pierson

j324

Member - Posts: 3

Joined: July 12, 2012

Location: Indiana, United States

Posted: July 12, 2012 at 5:53 PM / IP Logged

Okay thanks for the help. And with the double inputs i can just run 1 sub to 1 set of inputs and the other sub to the 2nd set of inputs corect?

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: July 12, 2012 at 9:55 PM / IP Logged

Yes

Kevin Pierson

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

still confused on wiring 2 dvc subs.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.