bose system

Home / the12volt's Install Bay / Car Audio / bose system (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

starryjeff

Member - Posts: 1

Joined: March 04, 2004

Location: United States

Posted: March 04, 2004 at 10:49 AM / IP Logged

i'm trying to install ALL new components on a 92 infiniti q45 (had a bose system) and basically I have done all of this but my new cdplayer will not turn on. I am not using the Accessory wire from the origonal bose radio due to the fact that it no longer will give a voltage when the car is turned on. So far i have tried to tap a wire which i think is an acc. wire from the rear defrost but, again, the radio will still not turn on. any ideas?!?!?!??!?!?!?!??!?!?!?!?!?!

thanks

jeff

Back to Top

Metra Tech

Copper - Posts: 125

Joined: October 21, 2003

Location: United States

Posted: March 04, 2004 at 10:56 AM / IP Logged

Are you using a wiring harness and if so, which one? Do you have the radio grounded to chassis as there is no ground in the factory plug? Have you tested for 12vdc on the accessory and constant wires with a meter?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bose system

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.