the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

pioneer 2700, 93 Ranger


Post ReplyPost New Topic
< Prev Topic Next Topic >
Fastlearner 
Silver - Posts: 346
Silver spacespace
Joined: March 23, 2005
Location: United States
Posted: July 29, 2005 at 6:33 PM / IP Logged  
Put a pioneer 2700 in a simple deck install. Everything worked fine until the customer came back. She only listens to one station(99.5). Turns out when the car is running she gets horrible static and engine whine on this one station. No other station. Everything comes in fine. When the engine is off the station comes in clear. We already switched the radio and the ground on car, and the antenna. We can't figure out the problem so help us.
Grkinstall 
Member - Posts: 22
Member spacespace
Joined: June 25, 2005
Location: United States
Posted: July 29, 2005 at 6:54 PM / IP Logged  

did you try putting a 25watt in line power filter

Fastlearner 
Silver - Posts: 346
Silver spacespace
Joined: March 23, 2005
Location: United States
Posted: July 29, 2005 at 6:57 PM / IP Logged  
No we didn't. We don't think that would work because it's only the one station.
Fastlearner 
Silver - Posts: 346
Silver spacespace
Joined: March 23, 2005
Location: United States
Posted: July 29, 2005 at 7:18 PM / IP Logged  
Well we tried something else. We hooked up the power and ground to our test bench and used the same speakers in the car. We still got a whine in there. But it wasn't as bad, still noticable. Need help quick.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 30, 2005 at 12:04 AM / IP Logged  
Have you tried using a different antenna ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Fastlearner 
Silver - Posts: 346
Silver spacespace
Joined: March 23, 2005
Location: United States
Posted: July 30, 2005 at 3:04 AM / IP Logged  
Used the test antenna and no difference. I just don't understand how it can be just the one station that usually comes in crystal clear. I'm not kidding when I say every other station comes in crystal clear. Another installer of 8 years has said to have never seen this before. It just doesn't make any sense.
Grkinstall 
Member - Posts: 22
Member spacespace
Joined: June 25, 2005
Location: United States
Posted: July 30, 2005 at 3:22 PM / IP Logged  
did you try the in line filter yet it will only take a minute

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer