autopage transmitter not receiving

Home / the12volt's Install Bay / Car Security and Convenience / autopage transmitter not receiving (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sci_tx_on

Member - Posts: 2

Joined: October 18, 2008

Location: Texas, United States

Posted: October 18, 2008 at 5:40 PM / IP Logged

Hi everyone. I have an AutoPage RF420. I was trying to install an LED scanner today and accidentally cut the three wires that goes to the 2-way antenna! I re-wired them and was able to lock and unlock my car with my LCD transmitter, but my transmitter would not update the status! In other words, when my car is locked or the alarm goes off, the icon on my transmitter doesn't show it is locked or the alarm has gone off. PLEASE HELP!

Thanks,

Lewis

sci_tx_on

Member - Posts: 2

Joined: October 18, 2008

Location: Texas, United States

Posted: October 18, 2008 at 8:01 PM / IP Logged

Nevermind. Got it fixed. Turns out, when I cut the antenna wires, it must have short-circuited something in the brain. I swapped the brain out with another and it works now!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

autopage transmitter not receiving

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.