giordon a f06 wiring 99 ram 1500

hi, i tried to install a giordon a-f06 on my 99 dodge ram 1500 and the system only clicks the relay, nothing more, i will like to see if you guys can healp me. here are the wires that i conect. 12v power red to red starter blue to yellow brown (White on the wiring harnes from the unit) to dark blue acc green to BLACK/ white tach purple to BLACK/ grey (only black at the coil) brake orange to to WHITE/ tan lights bronw to BLACK / YELLOW and i cant get the unlock/lock to work unlock WHITE/ black to pink/purple lock white to ORANGE / purple that is as far i got nothing work right. relays work, itried with the remote and the all work fine. but no start nor lock or unlock here are some pics of the wiring pics on my giordon system. please let me know guy, any healp will be apreciated. thanks

hi, guys my e-mail is ajtech81@gmail.com. thx

One piece of advice, bin it. Anything that asks you to go to the oil pressure switch instead of proper tach WILL NOT WORK. Once spent 2 days with one of these bits of rubbish, ended up making the customer throw it away and install a Clifford system.  There is also no GWR status to run a by-pass if needed. Also won't work with a manual transmission.

so, you think that i shure trash the unit?. no on making work?. what's a GWR status.? any ideas guys.

A "proper" R/S wil put out a GWR, AKA Status output, which goes to ground as the remote start initiates and stays grounded for the R/Ss duration, it's used mainly to energise by-passes for ignition imobilisers.

Looks , like you've connected wrongly "(White on the wiring harnes from the unit) to dark blue " instead of to the pink one (ignition).