the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

How To Get Out of Silent Mode 2 on Viper?


Post ReplyPost New Topic
< Prev Topic Next Topic >
gpspro 
Member - Posts: 15
Member spacespace
Joined: April 08, 2009
Posted: January 09, 2010 at 4:04 PM / IP Logged  
Got a new Viper 5901 for about a month now and I couldn't be happier. Unfortunately, I just accidentally dropped my 2-way remote control on a ground yesterday and the back lid of it popped out but not fully off. So I just pushed it back to close it. Tested OK, everything seems to work great except that the siren response sounds really soft (I can't bearly hear it) at all to when I arm, disarm and worst of all, no sound when alarm goes off. It appears that the brain went into the Silent Mode 2 after it got dropped. I did try to restore the "Confirmation Chirps" feature to default, i.e. On w/Warn Chirps On, but it still didn't work. Tried my 1-way control too, same results.
I'm not sure where to go next to get out of this mode. Any help would be greatly appreciated.
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: January 10, 2010 at 10:27 AM / IP Logged  
Silent mode 2? Sounds like a faulty siren issue to me!
commit your way to jehovah and he will act in your behalf. psalms 37:5
gpspro 
Member - Posts: 15
Member spacespace
Joined: April 08, 2009
Posted: January 10, 2010 at 1:33 PM / IP Logged  
Thanks man. I have the same feeling too.
d4rkzone 
Member - Posts: 9
Member spacespace
Joined: July 25, 2010
Location: United States
Posted: July 27, 2010 at 11:41 AM / IP Logged  
gpspro wrote:
Got a new Viper 5901 for about a month now and I couldn't be happier. Unfortunately, I just accidentally dropped my 2-way remote control on a ground yesterday and the back lid of it popped out but not fully off. So I just pushed it back to close it. Tested OK, everything seems to work great except that the siren response sounds really soft (I can't bearly hear it) at all to when I arm, disarm and worst of all, no sound when alarm goes off. It appears that the brain went into the Silent Mode 2 after it got dropped. I did try to restore the "Confirmation Chirps" feature to default, i.e. On w/Warn Chirps On, but it still didn't work. Tried my 1-way control too, same results.
I'm not sure where to go next to get out of this mode. Any help would be greatly appreciated.
Having a similar problem. How did you solve it?
Mark Mizenko 
Copper - Posts: 460
Copper spacespace
Joined: October 13, 2004
Location: Pennsylvania, United States
Posted: July 27, 2010 at 1:03 PM / IP Logged  
If the internal speaker on the remote control is not working, return it to the dealer and DEI will warranty it.
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: July 28, 2010 at 6:39 AM / IP Logged  
Are you referring to the siren in the car or the sound the remote makes which mimics the siren?
commit your way to jehovah and he will act in your behalf. psalms 37:5
d4rkzone 
Member - Posts: 9
Member spacespace
Joined: July 25, 2010
Location: United States
Posted: July 28, 2010 at 4:00 PM / IP Logged  
t&t tech wrote:
Are you referring to the siren in the car or the sound the remote makes which mimics the siren?
The problem was with the siren in the car. However I found the solution. I needed to re-configure it again using the "Feature Instructions".
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: July 28, 2010 at 8:14 PM / IP Logged  

Ok!

commit your way to jehovah and he will act in your behalf. psalms 37:5
fredddy9 
Member - Posts: 40
Member spacespace
Joined: October 21, 2009
Location: Alberta, Austria
Posted: July 31, 2010 at 1:21 AM / IP Logged  
regarding this topic,   are there any silicone protective sleeves available for LC3 remote (?)
actually i keep mine attached to my trousers not the car keys, but still it would be nice to have some protection even against the scratches or dust what can collect between the buttons.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: July 31, 2010 at 2:17 PM / IP Logged  
i have seen people with a leather/plastic case, but its bulky.
If you dont mind then im sure you can find it on ebay for less than 15 bucks.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer