compustar 4200

Home / the12volt's Install Bay / Car Security and Convenience / compustar 4200 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

netflow

Member - Posts: 3

Joined: October 22, 2010

Location: Quebec, Canada

Posted: October 22, 2010 at 10:36 PM / IP Logged

Compustar 4200,Chrysler Sebring

Doors opens and close. Engine dont starting. No lights flashings and dont hear any sounds from relay. Fuse on red wire to ignition was broken I changed it.

What to check?

Back to Top

simplyfalling

Copper - Posts: 69

Joined: May 09, 2009

Location: Massachusetts, United States

Posted: October 22, 2010 at 11:17 PM / IP Logged

Try taking it out of valet mode. Push buttons 1 and 3 at the same time. Should be lock and trunk release. Just something to try.

Back to Top

phil6710

Copper - Posts: 89

Joined: September 04, 2009

Location: New York, United States

Posted: October 22, 2010 at 11:27 PM / IP Logged

turn the ingition key on,off 5 time and the 5th time leavein the on position. You should hear the realay for the parking lights click and the lights should flash. Then press the lock button on the remote. This will take it out of valet mode

Back to Top

netflow

Member - Posts: 3

Joined: October 22, 2010

Location: Quebec, Canada

Posted: October 24, 2010 at 8:20 PM / IP Logged

I tried oth methods and nothing happend((

Back to Top

netflow

Member - Posts: 3

Joined: October 22, 2010

Location: Quebec, Canada

Posted: October 25, 2010 at 9:07 PM / IP Logged

No more ideas how to resolve problem???

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: October 26, 2010 at 3:17 PM / IP Logged

cycling ignition 5 times puts it into valet mode.

to get our of valet mode.

turn ignition on, press buttons 1 and 3.

if that doesnt work, reset the enture system by takin out all fuses for 1 minute, replace and reprogram all remotes.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar 4200

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.