viper 5704 h3/8 wire

Home / the12volt's Install Bay / Car Security and Convenience / viper 5704 h3/8 wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mavrick5522

Member - Posts: 2

Joined: February 08, 2013

Location: Kentucky, United States

Posted: February 23, 2013 at 8:43 PM / IP Logged

Hi all this is my first post so if I didn't post in the right place or did something wrong I'm sorry.

I just finished installing a viper 5704 in a 2003 escalade and got a lot of the info I needed from this forum but could never figure out what the h3/8 pink/black (87a) FLEX RELAY INPUT (key side of ign, acc or starter wire if needed)was for. all the info I could get was it wasn't needed. Could someone explain what it is actually used for. I would like to know for future install. Thanks

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 24, 2013 at 1:08 AM / IP Logged

Some vehicles will feed back through a second ignition wire because ignitions 1 and 2 are connected at the switch. When the alarm is on, this will cause the alarm to go off when you activate the R/S.

Garbage Peugeot and Citroen in Europe and I believe some Toyotas so you wire the second ignition after cutting as key side to pink/black and ignition side to pink/white similarly to the violet and green at H3/4 and H3/5.

Back to Top

mavrick5522

Member - Posts: 2

Joined: February 08, 2013

Location: Kentucky, United States

Posted: February 24, 2013 at 2:18 PM / IP Logged

Wow that sounds simple enough. Thanks for the reply howie.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5704 h3/8 wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.