the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1994 chevy 1500 autostart as1780

Home / the12volt's Install Bay / Car Security and Convenience / 1994 chevy 1500 autostart as1780 (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
belialsson 
Member - Posts: 4
Member spacespace
Joined: November 29, 2013
Location: Alberta, Canada
Posted: November 29, 2013 at 1:15 PM / IP Logged  
I am installing an autostart as-1780 and connected all my wires to the correct places and getting no response from the remote.
belialsson 
Member - Posts: 4
Member spacespace
Joined: November 29, 2013
Location: Alberta, Canada
Posted: November 29, 2013 at 1:56 PM / IP Logged  

this is what wires i have where and if i could get some input it would be great.

Constant- Red

Starter- Purple

Ignition- Pink

Acc- Orange

Tach- White off of igntion coil

Brake Switch- Orange

Parking lights-  Brown +

Door Lock- light blue

Door Unlock- BLACK/ white

Door trigger +- Blue/white

Door trigger - - Black

hood switch is connected

smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: November 29, 2013 at 2:09 PM / IP Logged  
Do you have the correct orange brake wire connected? Is the truck Automatic? If so is the yellow loop cut? And does the unit flash the parking lights 4 times when powered up?
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
belialsson 
Member - Posts: 4
Member spacespace
Joined: November 29, 2013
Location: Alberta, Canada
Posted: November 29, 2013 at 2:13 PM / IP Logged  

everthing i have read says there is a white brake wire wire but i dont have a white wire so i tested to see and the orange was the ticket. i am not getting any flashes when the unit is powered up. i have cut the loop due to the truck being an auto.

belialsson 
Member - Posts: 4
Member spacespace
Joined: November 29, 2013
Location: Alberta, Canada
Posted: November 29, 2013 at 2:48 PM / IP Logged  
So I am now getting the flashes when the unit is powerd up. But still no response from the remote at all. I have checked all of my connections and all seem to be correct and I have a good ground.
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: November 29, 2013 at 2:56 PM / IP Logged  
What are your wiring connections on the 5 pin connector?
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer