Hi everyone
I have a Viper 5706V, was professionally installed. Understanding that sensors are annoying, there is alot of car crimes in my area, so I felt it was wise.
Everything DEI, proximity sensor, ultrasonic sensor, stinger shock sensor.
I had the warn away on the prox sensor dialed in perfectly (yes I adjusted warn away, then full, per instructions). 5 seconds looking any of the windows and it would chirp consistently, and on time. I turned the interior prox sensor all the way down, because I kept getting faulty full triggers randomly.
I had the ultrasonic sensor unplugged for some time, because I didn't have time to dial that in with everything else. My shock sensor needed to be more sensitive as well. The shop did a good job, but when things aren't tuned outside of a lit shop, there are lots of faults IMO.
Today, I adjusted the shock sensor and plugged in the ultrasonic sensor for adjusting. My proximity warn away was not changed, and the interior prox sensor setting was all the way down.
I did the shock sensor first, and got it pretty much how I wanted it. I rolled my window part way down and tested ultrasonic after plugging it back in and adjusting a bit, and got it to warn away, with no full trigger (not sure if that's normal), but it took some effort most times to trip the ultrasonic. I then turned the interior prox sensor setting up a tiny bit at a time, so I could get full trigger at some point of someone reaching in. I am a fan of warn away first.
Basically, the car stopped communicating triggers to my remote. I fiddled with the sensor settings a bit and nothing. BUT, when I unlocked my car, it would report that a full alarm went off.
So I test this, I lock it, then 10 seconds later unlock it, and it reports full trigger again.
I then unplugged the ultrasonic, turned the prox sensors completely down (I couldn't get it unplugged), and turned the shock sensor all the way down. I started my car to make sure Volts were good, >13v standing, and 14v when idling. I tried it again, same thing!
All sensors turned off, disabled, even through the remote I bypassed ALL sensors, and it doesn't send anything to my remote, but I unlock and it tells me that the full trigger was tripped.
ANY advice?
Sometimes 4 buzzes from the remote sometimes 5, I couldn't find out what that means.
I have to keep it on silent, and if someone breaks in tonight, nothing will sound.
Thanks!
Nick
I hope I was clear, and not confusing.