accent 2008 + rs, cranking & not starting

Hello fellow DIYers, I just installed a DBALL2 + ProStart 6-button 2-way Remote Starter (from Canadian Tire) on my canadian '08 Hyundai Accent. - Everything is hooked up, the DBALL2 is apparently programmed based on the LED status - I'm getting the tach status from the DBALL2, everything else directly from the car wires - I'm getting the proper +12V on ignition and starter when remote starting - I can hear the fuel pump when remote starting On the other hand, the car cranks 8 secondes but does not start, even with the key in the ignition. The car obviously starts fine when starting normally. I also tried to press the gas pedal in case it's a fuel related problem. Any idea?

Sounds like tach not learned.