2010 wrx idatalink problem

Home / the12volt's Install Bay / Car Security and Convenience / 2010 wrx idatalink problem

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

scooby2573

Member - Posts: 2

Joined: September 08, 2015

Location: Ohio, United States

Posted: September 08, 2015 at 6:41 PM / IP Logged

I have a 2010 wrx hatchback I installed an avital 4103 remote start into. I used the dbi-ali sub-en doorlock interface in data mode. Everything works great except it wont relock the doors after it remote starts. I've gone thru the programming and it is set up to relock after start, but it wont do it. Anyone have any ideas?

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 09, 2015 at 5:09 PM / IP Logged

Is there a ignition key on this vehicle? If so have you rigged up a relay to convert dark blue status output to run the vehicles keysense? A wire that goes to POS (+) when you insert the key?

Back to Top

scooby2573

Member - Posts: 2

Joined: September 08, 2015

Location: Ohio, United States

Posted: September 10, 2015 at 6:32 AM / IP Logged

It does have a key. I will try that tonight. Thank you!

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 10, 2015 at 6:37 AM / IP Logged

Think it's BLACK/ white, goes POS (+) when key is inserted.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.