DBall 2 will not program

Home / the12volt's Install Bay / Car Security and Convenience / DBall 2 will not program

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pfwillard

Member - Posts: 2

Joined: April 10, 2016

Location: Vermont, United States

Posted: April 10, 2016 at 7:45 PM / IP Logged

Installed a Viper 4806V in a 2010 Ford Focus with a DBall 2 When I go to program the DBall I cycle the two keys and the LED flashes orange and press the programming button the instrument cluster lights up and the theft light starts flashing and the LED does not turn green.

peter

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: April 11, 2016 at 11:43 AM / IP Logged

More info is needed.

Factory Alarm or not?

Is DBALL2 connected W2W or D2D? Flashed with 402 Ford v3.13?

Please list your connections from the DBALL2 and the Viper 4806.

Are you jumping the ignition wire with 12 volts as described in step 4

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

pfwillard

Member - Posts: 2

Joined: April 10, 2016

Location: Vermont, United States

Posted: April 11, 2016 at 6:43 PM / IP Logged

It is W2W and is flashed all connections are per instructions. The thing is when pressing the programming button it will power up the ignition wire.

peter

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.