CS310I command start troubleshoot

Home / the12volt's Install Bay / Car Security and Convenience / CS310I command start troubleshoot

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

blaster45

Member - Posts: 5

Joined: August 29, 2016

Location: British Columbia, Canada

Posted: August 30, 2016 at 5:30 PM / IP Logged

I have the cs310i in my 2001 duramax 2500 and the in line 30amp fuse keeps blowing. I have checked the wiring over and can't see any problems with shorting but anytime I go to put the fuse in, it blows. It's worked before but I tried one day an found the fuse blown. Is there anytime else to check?

Back to Top

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: August 31, 2016 at 4:34 AM / IP Logged

Sounds like a stuck internal relay, probably the ignition or starter output.

Back to Top

blaster45

Member - Posts: 5

Joined: August 29, 2016

Location: British Columbia, Canada

Posted: August 31, 2016 at 4:42 PM / IP Logged

I just checked the ignition and starter relay and both work good. Open an close fine. Could it be the ignition switch?

Back to Top

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: August 31, 2016 at 8:44 PM / IP Logged

Would have to be a short to ground typically if it's blowing a 30A fuse. Is it the RED or the RED / Black that is blowing?

Try unplugging the heavy gauge wire plug before replacing the fuse, then plug it back in once you have replaced the fuse!

Back to Top

blaster45

Member - Posts: 5

Joined: August 29, 2016

Location: British Columbia, Canada

Posted: August 31, 2016 at 9:41 PM / IP Logged

It is the red one that kept blowing. But I reset the box today and plugged the fuse in an i got power through without a blown fuse. Just have to fix the hoodpin switch and I think it might work.

Back to Top

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: August 31, 2016 at 9:50 PM / IP Logged

sounds like the brain got stuck.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.