the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

grand cherokee windows


Post ReplyPost New Topic
< Prev Topic Next Topic >
bugluvr38 
Member - Posts: 38
Member spacespace
Joined: October 13, 2003
Location: United States
Posted: October 23, 2003 at 6:13 AM / IP Logged  
does anyone happen to know the windows up/windows down wires for the rear windows of a 93 grand cherokee?  i looked in the vehicle information page, but it only lists the front windows.  so if anyone knows off hand, i would appreciate it.  thanks in advance!
oh, god... what did i do now??
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 23, 2003 at 6:50 AM / IP Logged  
|  LR WINDOW UP/DN|blu/wht - RED / blk   |A  |drivers switch or kick panel|
|  RR WINDOW UP/DN|gry/blk - grn/wht   |A  |drivers switch or kick panel|
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
bugluvr38 
Member - Posts: 38
Member spacespace
Joined: October 13, 2003
Location: United States
Posted: October 27, 2003 at 1:36 AM / IP Logged  
thanks, jeff!
oh, god... what did i do now??
bugluvr38 
Member - Posts: 38
Member spacespace
Joined: October 13, 2003
Location: United States
Posted: October 27, 2003 at 1:49 AM / IP Logged  
can someone please explain thisi just installed a four-window roll up module (omega au 93.4) in my 93 grand cherokee.  i hooked it up via my crimestopper cs2000 series ii.  everything works fine.  however, i removed the door chime box (among other things) when i was installing it, just to get it out of the way.  after i put everything back together, it wouldnt work.  after a lot of guess and check work, i figured out that it was because of the door chime box.  if i plug it (chime) in, the window module will not work.  if i take it out, the window module works fine.  so somebody please not only help me solve this problem, but explain why this happens?  i am just baffled!  thanks!
oh, god... what did i do now??
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 27, 2003 at 8:01 AM / IP Logged  
Where did you ground the module ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
bugluvr38 
Member - Posts: 38
Member spacespace
Joined: October 13, 2003
Location: United States
Posted: October 28, 2003 at 2:53 AM / IP Logged  
i grounded it under a screw that screws into the metal plate under the dash on the drivers side, just left of the steering column.  as far as i know, this is just a structural piece of metal.  but im going to go take a break right now and have a closer look because you have given me a thought or two.  thanks!
oh, god... what did i do now??
bugluvr38 
Member - Posts: 38
Member spacespace
Joined: October 13, 2003
Location: United States
Posted: October 28, 2003 at 4:00 AM / IP Logged  
well, i dont see any reason why this would be a problem.  what was your thought?  im sure you know better than i do.
oh, god... what did i do now??
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 28, 2003 at 10:15 AM / IP Logged  

Just pulling possibilities out of the air. Wanted to make sure that you checked everything.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer