1997 sunfire power lock problem

hi,

i am installing the new compustar 2wss-as alarm/remote start. i have everything else hooked up but i cant seem to get the power locks to work. i am connecting the light blue and the white wires in the drivers kick panel, but i get nothing??

ne help would be appreciated

Thanks

ok, well i had an dei pager alarm before and all i did was run a wire from the passenger side over to the driver side, then hook them up the alarm lock and unlock outputs. this alarms lock/unlock outputs are + and -, so maybe im missing something, i dunno. so i just put both locks togther and both unlocks together, then put them on the appropiate wire from the alarm, but i get nothing...

the outputs are a blue wire that is positive lock, but doubles as a negative lock

and blue/black wire that is negative lock, but doubles as a positive unlock.