Viper 700 ESP ignition input

Home / the12volt's Install Bay / Car Security and Convenience / Viper 700 ESP ignition input (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

SAyeed khan

Member - Posts: 17

Joined: November 04, 2004

Location: Trinidad and Tobago

Posted: November 07, 2004 at 7:11 PM / IP Logged

In this alarm there are two wires for ignition kill. what i want to know is if u connect this ignition kill ,do u still have to connect the + ignition input , and if u do have to connect it which side of the circui do i connect it

johnnydi77

Copper - Posts: 54

Joined: May 17, 2004

Location: United States

Posted: November 09, 2004 at 7:04 PM / IP Logged

That relay is the starter kill and all you do is put one wire to ignition and the other connects directly to the yellow ignition input on your alarm. All the 2 wires are common. Be sure to hook the yellow to ignition and not accesory or else your starter kill won't work.

John J. DiStefano Jr.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 700 ESP ignition input

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.