tach to voltage sensing

Home / the12volt's Install Bay / Car Security and Convenience / tach to voltage sensing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: February 09, 2005 at 12:37 AM / IP Logged

should a rs have both types of inputs in order to use either one, or can the same tach input be hooked up to voltage sensing. if so where would it be hooked up to. my la-z-start rs only runs for about 5 minutes then shuts down, but only when the engine is cold. when the engine is up to "normal" temperature ill remote started and it will last the full 15 minuets i have it programed to. any ideas to why it wont last the full cycle with a cold engine.

gcorrea

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: February 09, 2005 at 9:44 AM / IP Logged

You have to choose either one, but not both. I used tach on all my install. One thing you can do is try resetting the remote starter unit and unplug the unit. Relearn the tach and set the running cycle to run longer than you normally would and see if that helps.

Be careful whose advice you buy, but be patient with those who supply it. tach to voltage sensing -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tach to voltage sensing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.