the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 corvette remote start.

Home / the12volt's Install Bay / Car Security and Convenience / 99 corvette remote start. (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
tcr03 
Member - Posts: 12
Member spacespace
Joined: April 03, 2005
Location: United States
Posted: April 03, 2005 at 11:07 PM / IP Logged  
i put a dei remote start on a 99 vette. i couldnt get it to remote start. it would send 12 volts through the starter wire but wouldnt crank the starter. need some help.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 03, 2005 at 11:31 PM / IP Logged  
What bypass module did you use to bypass the PAsslock system ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
tcr03 
Member - Posts: 12
Member spacespace
Joined: April 03, 2005
Location: United States
Posted: April 03, 2005 at 11:36 PM / IP Logged  
no passlock. it has vats.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 03, 2005 at 11:48 PM / IP Logged  

What wire did you use for the starter ? There's also a YELLOW/BLACK wire at the BCM.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
tcr03 
Member - Posts: 12
Member spacespace
Joined: April 03, 2005
Location: United States
Posted: April 03, 2005 at 11:50 PM / IP Logged  
yeh i know about that wire, but you cant use it for remote start. so i used the yellow thick gauge wire at the ignition harness
tcr03 
Member - Posts: 12
Member spacespace
Joined: April 03, 2005
Location: United States
Posted: April 03, 2005 at 11:51 PM / IP Logged  
another thing. do you know of a good spot to get the tach, besides at the pcm.
OhioMike1101 
Silver - Posts: 343
Silver spacespace
Joined: August 22, 2004
Location: United States
Posted: April 04, 2005 at 2:11 AM / IP Logged  

tcr03 wrote:
another thing. do you know of a good spot to get the tach, besides at the pcm.

Did a 2000 Vette not long ago and the PCM sucked.  Took off passenger wheel and it was behind the wheel well.  Very hard to get access to the wires.

Ended up just using voltage sense and it works great on voltage sense.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 04, 2005 at 6:21 AM / IP Logged  
You can use an injector wire as well. Use any wire opposite from pink. Also you didn't mention if this was a manual or auto transmission.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
tcr03 
Member - Posts: 12
Member spacespace
Joined: April 03, 2005
Location: United States
Posted: April 04, 2005 at 8:16 AM / IP Logged  
its an auto of course. we dont put them on manuals at work.
tcr03 
Member - Posts: 12
Member spacespace
Joined: April 03, 2005
Location: United States
Posted: April 05, 2005 at 12:28 PM / IP Logged  
i found the problem.  the brown 2nd acc wire on the car needs to be hooked up as a acc wire and not an ignition wire.  it must not have 12volts while cranking.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 9, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer