compustar 2w-800

Home / the12volt's Install Bay / Car Security and Convenience / compustar 2w-800 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

zotzot

Member - Posts: 5

Joined: February 08, 2005

Location: Saudi Arabia

Posted: June 15, 2005 at 3:40 PM / IP Logged

I will try to make this short

I bought the compustar 2w-800 with cm3000 module

Every thing was going ok with the installation and before I finish the violet pre wired to the starter kill stopped giving (-) ground when the system is armed

I examined the cm3000 circuit board for any failures like diodes or relays but every thing looks ok

I went thru the manual and I found out that in program (2) you can change that option to ignition kill? But that doesn't work ether I also can't enter the programming mood 1 or 2 because I need to increase the pulse time on aux1 and aux2

Any help please I spent 2 weeks installing the system and its all to waist if I can't solve this

thanks guys

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: June 16, 2005 at 11:04 AM / IP Logged

Sorry, but what exactly do you need help on?

Be careful whose advice you buy, but be patient with those who supply it. compustar 2w-800 -- posted image.

zotzot

Member - Posts: 5

Joined: February 08, 2005

Location: Saudi Arabia

Posted: June 16, 2005 at 12:32 PM / IP Logged

Sorry maybe I was not clear

What I need is

1- How to program the aux1 and aux2 to generate (-) pulse for 40sec instead of 1sec I under stand that it’s possible as the manual says? But the process is some how confusing

2- the violet pre wired to the starter kill relay stopped giving (-) ground when the system is armed how can I fix that so it produce ground (-)like before?

Thank you very much for your time

zotzot

Member - Posts: 5

Joined: February 08, 2005

Location: Saudi Arabia

Posted: June 16, 2005 at 12:42 PM / IP Logged

sory maybe i wasn't clear

wha i deed is

1- how to program the aux1 and aux2 to generate (-) pulse for 40 sec instead of 1 sec i understand that it's possible as the manual says but the process is some how confusig

2- the violet pre wired wire for the starter lill relay stoped giving (-) ground conection when the car is armed how can i fix that so it givis ground conection like before?

thak you very much for your time

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: June 16, 2005 at 1:31 PM / IP Logged

dont copy and paste from word processors

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

zotzot

Member - Posts: 5

Joined: February 08, 2005

Location: Saudi Arabia

Posted: June 17, 2005 at 5:07 PM / IP Logged

sory

maybe i wasn't clear

what i deed is

1- how to program the aux1 and aux2 to generate (-) pulse for 40 sec instead of 1 sec i understand that it's possible as the manual says but the process is some how confusig

2- the violet pre wired wire for the starter lill relay stoped giving (-) ground conection when the car is armed how can i fix that so it givis ground conection like before?

thak you very much for your time and sory agane

crucian4

Member - Posts: 3

Joined: June 25, 2005

Location: United States

Posted: June 26, 2005 at 3:28 AM / IP Logged

zotzot wrote:

sory

maybe i wasn't clear

what i deed is

1- how to program the aux1 and aux2 to generate (-) pulse for 40 sec instead of 1 sec i understand that it's possible as the manual says but the process is some how confusig

2- the violet pre wired wire for the starter lill relay stoped giving (-) ground conection when the car is armed how can i fix that so it givis ground conection like before?

thak you very much for your time and sory agane

I would like to know how to program the aux1 and aux2 for more time also. I guess you'll need a programmer. Im not sure. Hopefully

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar 2w-800

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.