matrix rsx 3.5

Home / the12volt's Install Bay / Car Security and Convenience / matrix rsx 3.5 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

screamdj

Member - Posts: 10

Joined: January 23, 2006

Location: United Kingdom

Posted: March 17, 2006 at 8:53 PM / IP Logged

can anyone help? i am having a problem with install? while i was installing the alarm the remote was working fine, but now it does not seem to respond? it works fine but shows up as if it is not within range?

what can i do?

Great minds think alike

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: March 18, 2006 at 8:23 PM / IP Logged

is the alarm function working ok or does that appear to be out of range also

Why oh Why didn't i take the blue pill

Darren Power

Back to Top

screamdj

Member - Posts: 10

Joined: January 23, 2006

Location: United Kingdom

Posted: March 19, 2006 at 7:20 PM / IP Logged

no the remote is not responding at all? i have tryied to rest it but still not luck? it was all working fine while the install was taking place? it only after i had complete the auto start that it stoped working?

Great minds think alike

Back to Top

rsudbay

Copper - Posts: 68

Joined: December 02, 2004

Location: United States

Posted: March 19, 2006 at 10:26 PM / IP Logged

try re-programing the remote to the alarm. that or you have damaged the remote. i got mine wet and it did the same thing

hey, everyone has got to start somewhere. but ill learn

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: March 20, 2006 at 9:24 AM / IP Logged

why were you testing it DURING the install? i always do the complete install and then walk over and pick up the remote....

you may have inadvertantly gone into programming mode by using it without the appropriate circuits powered... as mentioned try to re-learn the remote again on auto-learn.... and in the future dont fiddle with it during the install but complete the install first and then test your functions.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

32v2004mach1

Member - Posts: 1

Joined: March 19, 2006

Location: United States

Posted: March 21, 2006 at 10:12 PM / IP Logged

Does any one have a installation manual for the Clifford Matrix 3.5???? I need one and I seem to have hit a wall in finding one on the net. I'm doing an install on a 2004 Mustang Mach 1.

Any help would be great.

IF it's not a Mach 1.....It's not Muscle!!!

Back to Top

screamdj

Member - Posts: 10

Joined: January 23, 2006

Location: United Kingdom

Posted: March 22, 2006 at 5:32 PM / IP Logged

I have a manual, what i can try and do is make a photo copy of the quick guide and email it to you?

Great minds think alike

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

matrix rsx 3.5

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.