Tach signal wire '99 Ford V8

Home / the12volt's Install Bay / Car Security and Convenience / Tach signal wire '99 Ford V8 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

MisterPat

Member - Posts: 9

Joined: January 07, 2003

Location: United States

Posted: January 07, 2003 at 1:36 PM / IP Logged

Am having a difficult time trying to find an appropriate vehicle "tachometer wire" source on a '99 Ford 5.4L V8 w/ multi-coil system. Attempting to install Viper 550ESP Remote Start.

Can anyone help me with this?

Daytona Beach ~ The Land of Sun, Sand, Suds, Sex and Speed

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: January 07, 2003 at 3:15 PM / IP Logged

Tach Signal:

TAN / YELLOW

AT IGNITION COIL *

Notes:

* TAN / YELLOW At Pin #5 At Ignition Control Module (ICM) Or WHITE/ PINK At Pin #3 At ICM Can Also Be Used For Tach Signal. Ignition Control Module Located On Driver Side Of Engine Compartment Behind Battery. ** See Note #211 - Ford Ignition Switch Connection Diagram.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: January 07, 2003 at 8:58 PM / IP Logged

Go to an injector.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 07, 2003 at 11:28 PM / IP Logged

I agree with JWorm... alot easier to find the injector wire than that WHITE/ PINK wire !!

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

MisterPat

Member - Posts: 9

Joined: January 07, 2003

Location: United States

Posted: January 08, 2003 at 4:50 AM / IP Logged

JWorm-Jeff,

What/which injector wire. The PCM WH/PK coil wires don't sound so good but how about the "CTO Test" wire refferred to in another post?

Thanks for the response,

Patrick

Daytona Beach ~ The Land of Sun, Sand, Suds, Sex and Speed

jrilla

Gold - Posts: 1,498

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 08, 2003 at 8:25 AM / IP Logged

There will be two wires at each injector, each injector will have one wire that is the same on the rest of the injectors, grab the wire that is not common to the rest.

J Rilla

Owner/Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Tach signal wire '99 Ford V8

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.