Altima doors lock unlock

Home / the12volt's Install Bay / Car Security and Convenience / Altima doors lock unlock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: November 15, 2006 at 9:29 PM / IP Logged

hi all

this allmost 2 days i am working on altima 2004 to find lock unlock wires i still cant find them i checked all the wires in the car but i cant find brown and pink wires wiring diagram says pink and brown at bcm thees tow colours not availble in this car .

any help please

thanx

Back to Top

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: November 15, 2006 at 9:35 PM / IP Logged

These wires are only available on vehicles with left front only power window anti-pinch system. On vehicles with left AND right front power window anti-pinch system, use the factory alarm arm and disarm wires for door locks.

This will require you to wire into the drivers door switch

Meter this wire while turning the key in the driver door key cylinder. This wire will also lock the doors.

pink/blue - Lock negitive

WHITE/ blue - Unlock negitive

Where theres is a wire there's a way.

Back to Top

captainzab

Silver - Posts: 606

Joined: February 09, 2005

Location: United States

Posted: November 15, 2006 at 9:45 PM / IP Logged

If your altima does not have the wire, (which some altima does not!) reason too long to state.

use factory alarm disarm for unlock and arm for lock.

diode the wires. (or use relays if u do not have diodes)

disarm is WHITE/ blue neg. at bcm

arm is pink/blue neg. at bcm

Altima doors lock unlock -- posted image.

must use diodes for lock and unlock.

do a search if u want to know why.

Note: You Always Dont Get What You Pay For.

Back to Top

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: November 15, 2006 at 10:03 PM / IP Logged

hi

thanx for replay but i canot find thes wire in BCM i found them pink/blue and whit /blue at the swich insid driver door not in bcm its hard to run the wires from the swich to the unit i made sur i cheked all the wir in bcm but ther is no wit/blu or pink/ blu.

Back to Top

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: November 15, 2006 at 10:12 PM / IP Logged

It's not hard at all to run wires into the door of an altima. Take the panel off. Take out the speaker. Disconnect the door harness inside the drivers kick and feed it out. On average I'd say I spend about 10minutes running the wires. As far as I can tell that's a lot less than the 2 days you're sayng you spent trying to get the locks inside the car.

Cause I'm So white and nerdy...

First Class Certi-fried installer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Altima doors lock unlock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.