Lynx 2000 Install Help

Home / the12volt's Install Bay / Car Security and Convenience / Lynx 2000 Install Help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

thefranchise

Member - Posts: 41

Joined: August 22, 2002

Location: United States

Posted: February 05, 2003 at 11:42 PM / IP Logged

Hi all. I am upgrading from a Aladdin 2000 to a Lynx 2000 alarm.

The Aladdin 2000 had a specific output (-) for activating a transponder bypass box during the remote start process only. For some unknown reason the new verion Lynx 2000 does not have such an output.

What would be the PROPER way to securly hookup the box so that one could not simply hotwire and energize the unit? The box should only be engergized during a remote start until the car starts. Is there a way?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 06, 2003 at 2:19 PM / IP Logged

Use the 2nd ignition wire from the P6 harness ( BLUE / BLACK ) for the transponder bypass module.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Lynx 2000 Install Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.