Brake Light Mod w/Key Off

Home / the12volt's Install Bay / Relays / Brake Light Mod w/Key Off (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shesaidshewas18

Copper - Posts: 96

Joined: September 24, 2004

Location: United States

Posted: April 10, 2005 at 9:49 PM / IP Logged

I have this knight rider light type thing for my middle aka 3rd brake light on my car. Everytime I step on the brakes, the LEDs go back and forth, but ONLY when I step on the brakes.

What I want to do is have it go back and forth when my car is off. Is that possible? And also is there a bad side to it, like any possibilities of a negative effect happening?

Back to Top

Search for other posts by shesaidshewas18

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 10, 2005 at 9:56 PM / IP Logged

Bad side, it will kill your battery if the vehicle sits for an extended period of time.

To do it you will need to wire a relay, pin 85 constant +12V, 86 ign, 30 constant +12V, 87 output to light. Then you will need to place a six amp diode to block power from feeding back through to the rest of the brake lights. Or you could wire it like this, 85 +12V, 86 Ign, 30 light side of brake wire, 87A car side of brake wire, 87 +12V. Take your pick. You could also wire a toggle switch inline with either the ign input or 12V(pin 86) to disable the feature.

Don't forget appropriate fuses.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

shesaidshewas18

Copper - Posts: 96

Joined: September 24, 2004

Location: United States

Posted: April 12, 2005 at 12:57 AM / IP Logged

Your the f'in man! Would a 5amp fuse suffice? Or a 10?

Back to Top

shesaidshewas18

Copper - Posts: 96

Joined: September 24, 2004

Location: United States

Posted: April 12, 2005 at 1:01 AM / IP Logged

Also, for the 2nd method, do I still need to use a diode anywhere? When you say 6amp diode... Lets say I dont have any, but I do have six 1 amp diodes. Can I just line them up and wire it like that?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Brake Light Mod w/Key Off

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.