93 Honda Accord Wiring - CS2011RS

Hi!  I have a 93 honda accord SE and a CS2011RS (crimestopper) alarm/remote starter.  i havent really jumped into installing this yet, other than reading the installation instructions.  i think i am going to be needing wiring schematics for my car, unless someone has already installed this alarm on a 93 honda accord before and would be willing to help me out.  the install manual is here

http://www.crimestopper.com/techweb/InstructionBooks/Alarm/cs2011-install-2.pdf

One of the first questions i came up with is... "Connect to the negative horn trigger wire usually located near the steering column.  If the vehicle horn circuit requires +12V, then a relay is required"  does a honda accord require +12V for the horn circuit?  well, if i used my handy-dandy multimeter and ever found the wire, i could test it myself i guess.  maybe thats not such a good question afterall :P

okay - i guess i want to know if anyone else has done this install before, and if they have, do they have any comments or "words to the wise" before i start ripping my car apart.  im a new installer, but i do enjoy projects such as these, and think i should be able to have this thing working quite well, with a little bit of help.  i appreciate anything useful that you would be willing to share.

• Very basic installation. Make sure that you check the circuit for (-) or (+) input or output and only place the fuse in last just before you try the system out.
• Open one window in the car before you start the install ( don't want to lock yourself out while testing door locks