1997 Honda CR-V Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1997 Honda CR-V Alarm Information )
| 1997 Honda CR-V Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | White |
Ignition Switch Harness |
| Starter |
White |
Ignition Switch Harness |
| Ignition |
Black/Yellow |
Ignition Switch Harness |
| Ignition 2 |
Yellow |
Ignition Switch Harness (Heat/AC) |
| Accessory |
White/Black |
Ignition Switch Harness |
| Tach |
Blue |
24 Pin Connector above Fuse panel |
| Neutral Safety Wire |
Gray (-) |
Gear Position Switch |
| Brake Switch |
Green/White |
Brake Switch |
| Trunk Release |
Yellow (+) |
Switch |
| Trunk Pin |
Blue/Black |
22 Pin Factory Alarm Connector behind Driver's Kick |
| Parking Lights |
Red/Black Silver |
Green Connector above Fuse Panel |
| Head Lamp |
Red/White (+) |
Fuse Panel Red/Blue High Beam |
| Door Trigger |
Light Green/Red |
Gray Molex Driver's Kick Panel |
| Door Lock |
Green/White (-) |
22 Pin Factory Alarm Connector Driver's Kick |
| Door Unlock |
Green/Orange (-) |
Must use Relays |
| Horn Wire |
Gray/Silver |
22 Pin Factory Alarm Connector Driver's Kick |
| Windows Up |
LF=Red/Blue, RF=Blue/Yellow, LR=Green/Yellow, RR=Yellow |
| Windows Down |
LF=Red/Yellow, RF=Blue/Orange, LR=Green, RR=Yellow/Green |
|
|
Follow the12volt.com
Saturday, May 4, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
