
1998 Jeep Cherokee Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Jeep Cherokee Alarm Information )
1998 Jeep Cherokee Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Red/White |
Steering Column |
Starter |
Yellow Low Current |
Ignition Switch Harness at Steering Column |
Ignition |
Blue/Gray |
Ignition Switch Harness |
Ignition 2 |
Black/Orange |
Ignition Switch Harness |
Accessory |
Black/White |
Ignition Switch Harness |
Tach |
Gray/White |
In Black Connector at PCM |
Neutral Safety Wire |
Brown/Yellow (-) |
Switch on Transmission |
Brake Switch |
White/Tan |
Brake Switch |
Trunk Release |
Pink/Black (+) |
Driver's Kick Panel Rear Body Harness |
Trunk Pin |
Tan/Black (-) |
BCM |
Parking Lights |
Dark Blue/Red (+) |
Left Kick Panel or Light Switch |
Head Lamp |
Tan/Black (+) |
Light Switch |
Factory Disarm |
Purple/Yellow |
Driver's Kick Panel |
Door Trigger |
Yellow (-) |
Light under Dash |
Door Lock |
Orange/Purple (-) |
Driver's Door/Orange/Black Passenger's Door |
Door Unlock |
Pink/Black (-) |
Driver's/Passenger's Doors |
Horn Wire |
Black/Red (-) |
Steering Column |
Windows Up |
LF=Light Blue, RF=Brown/White, LR=Black/White, RR=Gray/Black |
Windows Down |
LF=White, RF=Purple/White, LR=Red/Black, RR=Green/White |
|
|
Follow the12volt.com
Saturday, May 3, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.