
1998 Jeep Grand Cherokee Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Jeep Grand Cherokee Alarm Information )
1998 Jeep Grand Cherokee Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Pink/Black |
Ignition Switch Harness |
Starter |
Yellow/Blue or Yellow |
Ignition Switch Harness |
Ignition |
Dark Blue/Gray |
Ignition Switch Harness |
Ignition 2 |
Red/Black |
Ignition Switch Harness (for AC) |
Accessory |
Black/Orange |
Ignition Switch Harness |
Tach |
Gray/White |
Coil |
Brake Switch |
White/Tan |
Brake Switch |
Trunk Release |
Tan/Black (-) |
Driver's Kick Panel |
Trunk Pin |
n/a |
Works with Dome Light |
Parking Lights |
Blue/Red (+) |
Left of Steering Column or Light Switch |
Head Lamp |
Tan/Black |
Light Switch |
Factory Disarm |
Purple/Yellow (-) |
Driver's Kick Panel Black Connector at ECM |
Door Trigger |
Yellow (-) |
Driver's Kick Panel see notes |
Door Lock |
5/Wire in Driver's |
Inside Driver's Door Orange/Purple Lock Pink/Black Unlock |
Door Unlock |
and Passenger's Doors |
Inside Passenger's Door Black/White L Pink/Black Unlock |
Horn Wire |
Gray/Orange (-) |
Steering Column |
Windows Up |
LF=Light Blue, RF=Brown/White, LR=Blue/White, RR=Gray/Black Doors |
Windows Down |
LF=White, RF=Purple/White, LR=Red/Black, RR=Green/White |
|
|
Follow the12volt.com
Saturday, May 3, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.