1999 Jeep Grand Cherokee Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Jeep Vehicles / 1999 Jeep Grand Cherokee

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Jeep Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1999 Jeep Grand Cherokee Alarm Information )

1999 Jeep Grand Cherokee Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Pink/Black or Red	Ignition Switch Harness
Starter	Yellow or Yellow/Blue	Ignition Switch Harness
Ignition	Dark Blue	Ignition Switch Harness
Ignition 3	Black/Orange	Ignition Switch Harness 2nd Accessory.
Accessory	Red/Black	Ignition Switch Harness
Tach	Tan/White	PCM right Rear Connector Engine (1 Cylinder Setting)
Neutral Safety Wire	Yellow (+)	Ignition Switch
Brake Switch	White/Tan	Brake Switch
Trunk Pin	Tan/Black (-)	52 Pin Connector Position 25 DR Side of Dash
Parking Lights	Yellow (-)	1K Ohm Resistor Negative
Head Lamp	Yellow (-)	Head Light Switch 330 Ohm RES.
Factory Disarm	Light Green/Orange (-)	Driver's Door Lock Switch 463 Ohm Resistor
Door Trigger	Yellow (-)	Courtesy Light under Dash
Door Lock	Orange/Black Driver's.	Orange/Purple Passenger's in each Front Door
Door Unlock	Pink/Black Driver's.	Pink/Purple Passenger's Reverse Polarity
Driver's Lock	Orange/Black	In Driver's Door
Driver's Unlock	Pink/Black	In Driver's Door
Passenger Unlock	Pink/Purple	Right Kick Panel
Horn Wire	Gray/Orange (-)	52 Pin Connector POS 1 behind left Side of DAS
Windows Up	LF=Light Blue, RF=Brown, LR=Dark Blue, RR=Gray
Windows Down	LF=White, RF=Purple, LR=Red/White, RR=Dark Green

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.