2000 Jeep Wrangler Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Jeep Vehicles / 2000 Jeep Wrangler

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Jeep Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Jeep Wrangler Alarm Information )

2000 Jeep Wrangler Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Pink/Blue or Red	Ignition Harness or Fuse Panel under Hood
Starter	Yellow	Ignition Switch Harness or Fuse Panel under Hood
Ignition	Blue	Ignition Switch Harness
Ignition 2	Black/Orange	Ignition Switch Harness (Heat/AC)
Accessory	Black/Dark Green	Ignition Switch Harness
Tach	Gray/White	Or Gray (-) At Coil
Neutral Safety Wire	Brown/Light Blue	Black 32 Pin Connector at PCM
Brake Switch	White/Tan	Brake Switch or White at Hazard Switch
Trunk Pin	n/a
Parking Lights	Black/Yellow (+)	Door Switch or Black/White Courtesy Light
Head Lamp	Light Green (+)	Light Switch
Door Trigger	Yellow (-)	14 Pin Gray Connector Driver's Kick Panel
Door Lock	n/a
Door Unlock	n/a
Horn Wire	Red/Yellow (-)	Steering Column
Windows Up	n/a
Windows Down	n/a

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.