2000 Kia Sephia Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Kia Vehicles / 2000 Kia Sephia

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Kia Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Kia Sephia Alarm Information )

2000 Kia Sephia Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	White	Ignition Switch Harness
Starter	Black/Yellow	Ignition Switch Harness
Ignition	Black/White	Ignition Switch Harness
Ignition 2	Blue/Red	Ignition Switch Harness
Accessory	Black/Red	Ignition Switch Harness
Tach	Yellow/White	Under right Dash 25 Pin Connector (ECM)
Neutral Safety Wire	Black/Red (+)	Clutch Switch
Brake Switch	Gray/Black	Brake Switch
Trunk Pin	Blue (-)	Trunk Light
Parking Lights	Red/Black (+)	Rear of Dimmer
Head Lamp	Red/Black (+)	Bottom of Steering Column
Factory Disarm	Green	Ignition Harness
Door Trigger	Red/Yellow (-)	Timer in Driver's Kick
Door Lock	ACTUATOR
Door Unlock	Actuator
Driver's Lock	Yellow/Red PASS-	Side at Power Door Lock Relay
Driver's Unlock	Yellow/Green PASS-	Side at Power Door Lock Relay
Horn Wire	Blue/Red (-)	Base of Steering Column
Windows Up	LF=Red, RF=Red/Yellow, LR=Red/Blue, RR=Red/White
Windows Down	LF=Green, RF=Green/Yellow, LR=Blue/White, RR=Green/White

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.