1995-97 Lexus GS300 Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1995-97 Lexus GS300 Alarm Information )
|1995-97 Lexus GS300 Alarm, Remote Start, Keyless Entry Wiring Information|
||Changes to White in Ignition Switch Harness
||Changes to Black/Blue (22Gauge) in Ignition Switch Harness
||Ignition Switch Harness or Black/Orange (Small)
||Same Color on other Side of Connector Ignition Switch Harness.
||Yellow or Pink/Blue
||Ignition Switch Harness
||Trunk Pin Switch or Driver's Running Board
||Light Green (+)
||Dimmer Switch or at Fuse Panel
||Driver's Dash behind Fuse Panel
||Arms + Disarms with Locks
||White Connector to right of Fuse Panel.
||Driver's Kick Panel Negative Trigger |
||Driver's Kick 2 Pulse to Unlock
||LF=Green, RF=Green/White, LR=Red, RR=Green/Black
||LF=Red, RF=Red/Blue, LR=Black/Red, RR=Red/Black
Friday, June 2, 2023
• Copyright © 1999-2023 the12volt.com, All Rights Reserved
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.