1998 Lincoln Navigator Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Lincoln Vehicles / 1998 Lincoln Navigator

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Lincoln Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Lincoln Navigator Alarm Information )

1998 Lincoln Navigator Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Green/Purple or Yellow	Ignition Switch Harness
Starter	Red/Light Blue	Ignition Switch Harness
Ignition	Blue/ Light Green	Ignition Switch Harness
Ignition 2	Gray/Yellow	Ignition Switch Harness
Accessory	Red/Black	Ignition Switch Must use for Remote Start
Tach	Pink/White 4.6L	Or Light Green/White For 5.4L
Neutral Safety Wire	Red/Light Blue	Ignition Switch
Brake Switch	Light Green	Brake Switch or Driver's Kick Panel
Trunk Release	White/Purple (-)	Driver's Kick Panel 20 Pin Connector
Trunk Pin	White/Purple (-)	BCM 26 Pin Connector Pin 4 above Fuse Panel
Parking Lights	Brown (+)	Driver's Kick Panel
Head Lamp	Red/Yellow (+)	Light Switch
Factory Disarm	Dark Green/Purple(-)	Driver's Kick Panel or w/Locks
Door Trigger	Light Blue/White	Keyless Module
Door Lock	Pink/Yellow (-)	Keyless Module under Dash
Door Unlock	Pink/Light Green(-)	Keyless Module under Dash
Driver's Lock	Pink/Black	Driver's Door JAM Boot
Driver's Unlock	Red/Orange	Driver's Door JAM Boot
Passenger Unlock	Pink/Orange	Keyless Module
Horn Wire	Dark Blue (-)	Steering Column
Windows Up	LF=White/Black, RF=Tan/Blue, LR=Yellow/Blue, RR=Red/Black
Windows Down	LF=Tan/Light Blue, RF=White/Yellow, LR=Gray/Orange, RR=Yellow/Black

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.