
1999 Lincoln Town Car Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1999 Lincoln Town Car Alarm Information )
| 1999 Lincoln Town Car Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Light Green/Purple |
Ignition Switch Harness |
| Starter |
Red/Blue |
Ignition Switch Harness |
| Ignition |
White/Yellow |
Ignition Switch Harness |
| Ignition 2 |
Pink/Black |
Ignition Switch Harness (Heat/AC) |
| Ignition 3 |
Gray/Yellow |
Ignition Switch Harness (Air Bag Light) |
| Accessory |
Black/Light Blue |
Ignition Switch Harness |
| Tach |
White/Red |
PCM on Driver's Firewall (One Cylinder Setting) |
| Brake Switch |
Light Green |
Brake Switch |
| Trunk Release |
White/Purple (+) |
Switch |
| Trunk Pin |
Black/Pink (-) |
Light in Trunk |
| Parking Lights |
Brown (+) |
Light Control Module right of Column |
| Head Lamp |
Red/Yellow (+) |
Light Switch |
| Factory Disarm |
Dark Green/Purple (-) |
|
| Door Trigger |
Black/Light Blue (+) |
LCM behind Driver's Dash right of Column |
| Door Lock |
Pink/Yellow |
Positive Trigger |
| Door Unlock |
Pink/Light Green |
Driver's or Passenger's Kick Panel |
| Driver's Lock |
Pink/Black |
Dark Door Jamb Boot |
| Driver's Unlock |
Red/Orange |
In Driver's Door |
| Passenger Unlock |
Pink/Orange |
Dark Door Jamb Boot |
| Horn Wire |
Dark Blue (-) |
Steering Column at LCM |
| Windows Up |
LF=White/Black, RF=Tan/Blue, LR=Yellow/Blue, RR=Red/Black |
| Windows Down |
LF=Yellow, RF=White/Yellow, LR=Gray/Orange, RR=Yellow/Black |
|
|
Follow the12volt.com
Friday, October 24, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.