1998 Mazda 626 Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Mazda 626 Alarm Information )
| 1998 Mazda 626 Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Black |
Ignition Switch Harness |
| Starter |
Green |
|
| Ignition |
Black/White |
Ignition Switch Harness |
| Ignition 2 |
Black/Red |
Ignition Switch Harness |
| Accessory |
Blue |
Ignition Switch Harness |
| Tach |
White |
Coil |
| Neutral Safety Wire |
Light Green/Blue |
Pin 64 PCM Center Console |
| Brake Switch |
White/Green |
Brake Switch |
| Trunk Release |
Orange (-) |
OEM Relay left of Column or CPU Driver's Kick Panel |
| Trunk Pin |
White/Black |
CPU Driver's Kick or Trunk Light |
| Parking Lights |
White/Red (+) |
Green Connector bottom of Fuse Panel |
| Head Lamp |
Yellow |
White 15 Pin Connector left of Steering Column |
| Hood Pin |
Blue/Orange |
CPU behind Fuse Panel |
| Factory Disarm |
Light Green/Red (-) |
Driver's Kick Panel at CPU Pin 8 |
| Door Trigger |
Red/White (-) |
Bottom of Fuse Panel Green 16 Pin Connector |
| Door Lock |
Brown/Yellow (-) |
Left of Steering Column at Relays |
| Door Unlock |
White (-) DR |
Brown/White other Doors left of Column |
| Horn Wire |
Green/Orange (-) |
Blue 4Pin Connector right of Steering Column |
| Windows Up |
LF=Red/Black, RF=Green, LR=Blue, RR=Blue |
| Windows Down |
LF=Red, RF=Red, LR=Red, RR=Red |
|
|
Follow the12volt.com
Wednesday, January 22, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
