1999 Mazda Millenia Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Mazda Vehicles / 1999 Mazda Millenia

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Mazda Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1999 Mazda Millenia Alarm Information )

1999 Mazda Millenia Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Green	Ignition Switch Harness
Starter	Black/Yellow	Ignition Switch Harness
Ignition	Black/White	Ignition Switch Harness
Accessory	Black/Red	Ignition Switch Harness
Tach	Yellow/Blue	Distributor or Green/Blue in 16 Pin Connector left of Steering Column
Neutral Safety Wire	Black/Red (-)	Starter Relay Engine Computer Fuse Driver's Side
Brake Switch	White/Green ( +)	Brake Switch
Trunk Release	Green (+)	Driver's Kick Panel from Driver's Door
Trunk Pin	Red (-)	Driver's Kick REST at Ground Key OFF Diode Isolate
Parking Lights	Orange (+)	Fuse Panel Green Connector
Head Lamp	White/Purple (-)	Steering Column
Hood Pin	Brown/White	Junction Box under Dash
Factory Disarm	Light Green/Red (-)	In Driver's Kick Panel
Door Trigger	Light Green (-)	Driver's Kick Panel (
Door Lock	Red/Black (-) or Orange	One Wire Harness from Door
Door Unlock	Red/Black (-)	1K Resistor to Lock, (-)Unlock
Driver's Lock	Red	Left Kick Panel
Driver's Unlock	Blue/Black	Left Kick Panel
Passenger Unlock	Green	Right Kick Panel
Horn Wire	Green/Red (-)	Steering Column
Windows Up	LF=Green, RF=Green/White, LR=Blue/White, RR=Green/Yellow
Windows Down	LF=Red/Blue, RF=Red/White, LR=Yellow/White, RR=White/Red

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.