1998 Mercury Grand Marquis Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Mercury Vehicles / 1998 Mercury Grand Marquis

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Mercury Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Mercury Grand Marquis Alarm Information )

1998 Mercury Grand Marquis Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Yellow or Light Green	Ignition Switch Harness
Starter	White/Pink	Ignition Switch Harness
Ignition	Brown/Pink	Ignition Switch Harness
Ignition 2	Pink/Black	Ignition Switch Harness (Air Bag )
Ignition 3	Black/Light Green	Ignition Switch Harness
Accessory	Gray/Yellow (2)	Same Wires Ignition Harness (Heat/AC)
Tach	White/Pink	PCM DR Rear Engine near Master Cylinder, 1 Cylinder Setting
Neutral Safety Wire	Not Grounding	OEM Switch opens Starter Circuit
Brake Switch	Light Green	Brake Switch or 16 Pin Connector Driver's Kick
Trunk Release	Purple/Yellow (+)	3 Pin Connector Driver's Kick Panel
Trunk Pin	Black/Pink (+)	Trunk LID Switch Center of Trunk
Parking Lights	Brown (+)	Light Switch or Driver's Kick Panel Black Connector
Head Lamp	Red/Yellow	Light Switch
Factory Disarm	Green/Purple (-)	Driver's Door Boot
Door Trigger	Black/Light Blue (+)	Light under Dash
Door Lock	Pink/Yellow	W/Keyless Positive Trigger Driver's Boot
Door Unlock	Pink/Light Green	W/o Keyless Entry Reverse Polarity
Horn Wire	Dark Blue (-)	Steering Column
Windows Up	LF=White/Black, RF=White/Yellow, LR=Gray/Orange, RR=Red/Black
Windows Down	LF=Tan/Black, RF=Tan/Light Blue, LR=Yellow/Blue, RR=Yellow/Black

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.