
2000 Mercury Tracer Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Mercury Tracer Alarm Information )
| 2000 Mercury Tracer Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Black/Orange |
Ignition Switch Harness |
| Starter |
Black/Light Green |
Ignition Switch Harness |
| Ignition |
Gray/Yellow |
Ignition Switch Harness |
| Ignition 2 |
Red/Light Green |
Ignition Switch Harness |
| Accessory |
Red/Light Blue |
Ignition Switch Harness |
| Tach |
Light Green/Red |
Power Control Module (PCM) |
| Neutral Safety Wire |
White/Pink |
Ignition Harness or Brown/Yellow Rear Transaxle |
| Brake Switch |
Green |
Brake Switch |
| Trunk Release |
Green/Black (-) |
Module left or right Rear Side Panel |
| Trunk Pin |
Orange/White (-) |
Light in Trunk |
| Parking Lights |
Red/Black (+) |
Connector/Connector Driver's Kick Panel |
| Head Lamp |
White/Blue (-)OR |
Brown at Head Light Switch |
| Hood Pin |
Blue/White (-) |
Near Fuse Panel in White Connector |
| Factory Disarm |
Black/White (-) |
Ignition Switch is EnergizeD |
| Door Trigger |
Red/White (+) |
Driver's Kick Panel |
| Door Lock |
Green/Orange (-) |
Driver's Kick Panel |
| Door Unlock |
Green/White (-) |
Driver's Kick Panel |
| Driver's Lock |
Green/Orange |
ACTUATORS |
| Driver's Unlock |
Red/White |
ACTUATORS |
| Horn Wire |
Green/Orange (-) |
Steering Column |
| Windows Up |
LF=Red/Black, RF=Red/White, LR=White/Red, RR=Yellow/Green |
| Windows Down |
LF=Red/Green, RF=Green/Black, LR=Green/Yellow, RR=Blue/White |
|
|
Follow the12volt.com
Saturday, November 29, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.