1993 Mercury Villager Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Mercury Vehicles / 1993 Mercury Villager

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• View all Mercury Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1993 Mercury Villager Alarm Information )

1993 Mercury Villager Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	White/Purple	Ignition Switch Harness
Starter	Red	Ignition Switch Harness
Ignition	White/Red	Ignition Switch Harness
Ignition 2	Brown	Ignition Switch Harness, Accessory 2
Accessory	White/Green	Ignition Switch Harness
Tach	Green	Coil
Brake Switch	Yellow/Black	Brake Switch
Trunk Release	Brown/White (-)	Driver's Kick Panel
Trunk Pin	Light Brown/White (-)	Driver's Kick use Diode to Isolate
Parking Lights	Pink	Driver's Kick Panel
Head Lamp	Gray/Red	Light Switch
Hood Pin	n/a
Factory Disarm	n/a
Door Trigger	Red/White (-)	Driver's Kick Panel
Door Lock	Green/White (-)	Driver's Kick or Console, White 3 Pin Connector
Door Unlock	Green/Orange (-)	Behind cassette compartment Negative Trigger
Horn Wire	Black (-)	Steering Column
Windows Up	LF=Blue/Pink, RF=Green/Black
Windows Down	LF=Blue/Green, RF=Orange/Black

• Cruise Control Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.