1999 Mercury Villager Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1999 Mercury Villager Alarm Information )
| 1999 Mercury Villager Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | White/Purple |
Ignition Switch Harness |
| Starter |
Red |
Starter 2 Wire is White/Blue in Ignition Switch Harness |
| Ignition |
Brown |
Ignition Switch Harness |
| Accessory |
Red/Green or Blue |
Ignition Switch Harness (Heat/AC) |
| Tach |
Green/White (AC) |
Ignition Module or PCM |
| Brake Switch |
Yellow/Black |
Brake Switch |
| Trunk Pin |
Light Brown/White (-) |
Center Console ( Diode Isolate) |
| Parking Lights |
Pink (+) |
Light Switch |
| Head Lamp |
Gray/Red |
Light Switch |
| Hood Pin |
Black/Pink (-) |
Pin Switch under Hood |
| Factory Disarm |
Red/Black (-) |
Driver's Kick Panel 16 Pin Connector |
| Door Trigger |
White (-) |
Driver's under Dash Light |
| Door Lock |
Red (+) |
10 Pin Connector Driver's Door Boot |
| Door Unlock |
Red/Black (+) |
Positive Door Trigger |
| Driver's Lock |
Green/Yellow |
Left Kick Panel |
| Driver's Unlock |
White/Green |
Left Kick Panel |
| Passenger Unlock |
White/Red |
Right Kick Panel |
| Horn Wire |
Yellow (-) |
Steering Column |
| Windows Up |
LF=Purple, RF=Green/Black, LR=Red/White, RR=Red |
| Windows Down |
LF=Blue/Red, RF=Orange/Blue, LR=Red/Black, RR=Red/Blue |
|
|
Follow the12volt.com
Sunday, March 15, 2026
• Copyright © 1999-2026 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
