2000 Mitsubishi Mirage Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Mitsubishi Mirage Alarm Information )
| 2000 Mitsubishi Mirage Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | White |
Ignition Switch Harness |
| Starter |
Black/Yellow |
Ignition Switch Harness |
| Ignition |
Black/White |
Ignition Switch Harness |
| Ignition 2 |
Blue/Black |
Ignition Switch Harness |
| Accessory |
Blue/White |
Ignition Switch Harness |
| Tach |
White |
Coil |
| Neutral Safety Wire |
Black/Red |
Top of Transaxle on Driver's Side |
| Brake Switch |
Green |
Brake Switch |
| Trunk Pin |
Green/Red |
Trunk Light |
| Parking Lights |
Green/White |
13 Pin Connector above Fuse Panel |
| Head Lamp |
Red/White (-) |
Light Switch |
| Factory Disarm |
n/a |
|
| Door Trigger |
Black (-) |
2 Pin Dome Lamp Connector-top left Fuse Panel |
| Door Lock |
Blue/White (-) |
Door Lock Module built into rear of Fuse Panel |
| Door Unlock |
Light Green/Black |
|
| Driver's Lock |
Blue/Red |
Under Dash on left at (ETACS) |
| Driver's Unlock |
Blue/Black |
Under Dash on left at (ETACS) |
| Horn Wire |
Green/Red (-) |
Horn |
| Windows Up |
LF=Red/Black (+), RF=Yellow/Blue, LR=Red/White, RR=Red/Blue, each Door |
| Windows Down |
LF=Green/Black (+), RF=Green/Yellow, LR=Green, RR=Green/White, each Door |
|
|
Follow the12volt.com
Thursday, March 30, 2023
• Copyright © 1999-2023 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
