2000 Mitsubishi Montero Sport Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Mitsubishi Vehicles / 2000 Mitsubishi Montero Sport

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Mitsubishi Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Mitsubishi Montero Sport Alarm Information )

2000 Mitsubishi Montero Sport Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	White	Ignition Switch Harness
Starter	Black/Yellow	Ignition Switch Harness
Ignition	Black/White	Ignition Switch Harness
Ignition 2	Blue/Red	Ignition Switch Harness
Accessory	Blue	Ignition Switch Harness
Tach	White	ECM in Passenger's Kick Panel
Brake Switch	Green	Brake Switch
Trunk Pin	n/a	Same as Door Trigger
Parking Lights	Green/White	Front of Fuse Panel 2 Pin Connector
Head Lamp	Red/Blue	HL Relay Driver's Fender behind Battery
Door Trigger	Green/Red (-)	Front Fuse Panel 12 Pin Connector Position 8
Door Lock	Black/Red (-)	Front of Fuse Panel 12 Pin Connector
Door Unlock	Black/Blue (-)	Side of Fuse Panel 10 Pin Connector
Driver's Lock	Blue/Orange	Relay
Driver's Unlock	Blue/Green	Relay
Passenger Unlock	Blue/Red	UPPER left Kick
Horn Wire	Green/Black	3 Pin Connector Steering Column
Windows Up	LF=Red, RF=Red/Blue, LR=Red/White, RR=Red/White
Windows Down	LF=Green, RF=Black/Yellow, LR=Green/White, RR=Green/White

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.